		CONTROL:
			Ethernet/IP is the preferred control method, although RS232 is supported as well.

		VIDEO MATRIX:
			The profile supports a maximum of 8 x 8 video switching:
			- e.g. for the HMXL88-V2; 8x HDMI inputs can be independently routed to 8 outputs (6x HDBaseT + 2x HDMI)
			
			Each output will be enabled when 1 or more sources are assigned to it and disabled when no sources are assigned to it.
			
		POWER ON/OFF DEVICE:
			A 'PowerOnDevice' custom action and a 'PowerOffDevice' custom action have been added to the profile.
			
		FEEDBACK:
			A number of state variables have been created to provide feedback for each output, these are:
			- Selected Input
			- Current Power Status (Weather the specific output is Enabled or Disabled)
			
			These state variables provide two way feedback.  This means that the state variable values will be updated in the following scenarios:
			A switch(source selection) for an output is made in Savant
			A switch(source selection) for an output is made via the Blustream App
			A switch(source selection) for an output is made via the hard buttons on the matrix (Changes are polled for every 30 seconds)
			
			There is also a Device Power Status state variable (Changes are polled for every 30 seconds) which will provide information on if the device is powered On or Off.
			NOTE: If the device is turned off using the switch on the back of the unit the Device Power Status state variable will not get updated.